Bose Cinemate Digital Home Theater Speaker System - Manual (Page 6)

6
S
YSTEM
S
ET
UP
S YSTEM S ETUP
English Français Español
Selecting a location for your CineMate TM speaker system
Use the following guidelines to choose locations and positions for the speakers and the
Interface module. While these guidelines are offered to ensure the best system performance,
you may find other placement variations that are more convenient and provide the sound you
enjoy.
Note: Keep in mind that the Acoustimass ® module is the only part of this system that connects
to a power outlet.
Positioning the Interface module
The Interface module receives commands from the universal remote control and provides audio
input connections for the CineMate
TM speaker system. The remote control commands allow you
to turn the speakers on, change the volume, and mute or turn off the speaker system.
• Position the Interface module on a flat surface near the TV and other home theater equipment
(Figure 2). The remote should have a clear line of sight to the Interface module, the TV, and
any other equipment it will control.
• Keep the Interface module within 15 feet (4.6 meters) of the Acoustimass module, to which it
connects.
• If you position the Interface module on a shelf, make sure the front edge of the module is
flush with the front edge of the shelf. If on a high shelf, make sure the front edge of the
module extends slightly past the front of the shelf, so the shelf does not block signals from
the remote control.
• Do not position the Interface module in direct sunlight.
• Peel the protective film off the lens on the front of the Interface module.
CAUTION: When positioning the Interface module, avoid blocking any ventilation openings on
the TV or other electronic equipment.
Figure 2
Example location for the
Interface module
Interface
module
Left Right