Philips PhotoViewer User Manual
Page 6
8
Note
See the documentation that came with your TV
or audio system for information about the audio
inputs on your TV or audio system.
Caution
Switch off the TV or audio system and
disconnect it from the power outlet.
1
Connect the by-packed audio cable to the
audio outputs of the PhotoViewer.
2
Connect the other end of the audio cable to
your TV or audio system.
4
4
3.2.3. To the power outlet
1
Connect the by-packed power adapter
to the power socket (J) on the
PhotoViewer.
5
5
1
Connect the power adapter of the
PhotoViewer to a power outlet.
2
Connect the TV and audio system to a
power outlet.
3.3 Stand
You can put the PhotoViewer fl at on a surface,
or you can put it in the by-packed stand. To put
the PhotoViewer in the stand, attach the rubber
product sticker around the label on the bottom
of the PhotoViewer.
6
6
Caution
Handle the product with care to avoid
scratches on the cover.
3.4 Set
up
1
Switch on the TV.
Note
Make sure that you made all connections and
set the TV to the correct external input (for
example, EXT, 0, AV).
On the PhotoViewer:
2
Press the power switch (A).
The PhotoViewer switches to stand-by.
On the remote control:
3
Press the standby-on button (1).
After approximately 10 seconds, the home
menu shows.
01_Picture viewer SPV3000_0807_E8 8
01_Picture viewer SPV3000_0807_E8 8
8/7/07 2:47:38 PM
8/7/07 2:47:38 PM