Black Box 16 port - Manual (Page 149)

Black Box Console Server user guide 149
Communities are numbered according to the order they are created in. You can list
them using the show snmp command.
See also add community , delete trap , show snmp
delete DNS
user level:
admin This command enables you to delete the DNS (Domain Name Service) host or hosts
in your network.
Syntax d e l e t e D N S i n t e r n e t _ a d d r e s s
Note ‘DNS’ must be entered in upper case. Also:
Menu
equivalent Network Configuration - DNS - delete DNS
See also add DNS , delete WINS , show server
delete gateway
user level:
admin This command enables you to delete a gateway. The host will not be deleted from the
host table.
Syntax
d e l e t e g a t e w a y h o s t n a m e
Menu
equivalent Network Configuration - Gateways
See also add gateway , set gateway , show gateways
delete host
user level:
admin This command enables you to delete a host from the host table. If the host is
referenced by any predefined telnet or rlogin session, or is defined as a gateway,
DNS or WINS host, the message <in use> will be displayed and it will not be
deleted.
Syntax
d e l e t e h o s t h o s t n a m e
internet address is the internet address in dot decimal notation. If you cannot
remember the address type a space and then a question mark after
DNS; e.g. del DNS ?
The unit will list the ip addresses of DNS machines entered in its
DNS table. Type the ip address.