Black Box 16 port - Manual (Page 41)

Black Box Console Server user guide 41
8. Accept the form; you will be returned to the Main Menu.
You may want to save your configuration changes permanently; see Saving
configuration changes on page 62
9. Reboot the unit. Rebooting will ensure that other network devices can
communicate with it.
Note If you set the port to authenticate by RADIUS only, users will not be able to dial in
and connect if the network connection is down (no access to RADIUS server).
Tip If you are not using the RADIUS service, you can leave authentication set to ‘both’.
You will have entered users in the Console Server’s user table. The unit will
authenticate users via its own user table and, provided user names and passwords
are valid, should not need recourse to a RADIUS host.