Hyundai H-1006 - Manual (Page 3)

3
POWER SUPPLY
BATTERY OPERATION
· Set the FUNCTION switch to the TAPE position.
· Open the battery compartment cover.
· Insert 4 UM-1 (D) -size batteries. Please observe correct battery polarities or the set will not work.
· Close the battery compartment cover.
AC OPERATION
· Before the first connecting of the appliance check that voltage indicated on the rating label corresponds the mains voltage in your home.
· Plug the corresponding end of cord into the AC socket on the rear of the set.
· Insert the plug into power supply.
CAUTION:
· When the set is only used with AC or is not used for 2 weeks or more, please remove the batteries, to avoid damage to the set from
leakage of batteries.
· Always unplug the appliance from power supply, when no use long time.
· This radio cannot be operated by batteries if the AC power cord is connected to the unit.
FUNCTION
FUNCTION SWITCH
· Position to RADIO for:
-Radio reception
-Cassette recording from the radio
· Position to TAPE for:
-Cassette playback
SOUND ADJUSTMENT
VOLUME
The level of sound reproduced by the loudspeaker is adjusted by the VOLUME control.
NOTE:
During recording, adjusting the VOLUME control only affects the monitor sound and not the content of recording.