Windows® vista audio setup, Windows, Vista audio setup – Bose Multimedia Companion 5 User Manual
Page 13
S
YSTEM
S
ET
UP
13
S
YSTEM
S
ETUP
English
Français
Español
Windows
®
Vista audio setup
IMPORTANT!
• Do not unplug any cables during this setup procedure.
• For additional help with your audio setup, please visit
http://owners.bose.com/Companion5.
1.
Plug in the USB cable. Wait for the device driver installation message to appear on your
computer screen (Figure 6).
Figure 6
Device driver installation
message
• If any other messages appear that interrupt this setup process, refer to “Troubleshoot-
ing” on page 19.
• If you do not see this messages, the capability to display it may be disabled in your
computer. Wait two minutes before proceeding to the next step.
2.
Click in the bubble to display the installa9tion status (Figure 7). Wait for the installation to
finish.
Figure 7
Device driver installation
status
3.
Open the control panel and click Hardware and Sound (Figure 8).
Figure 8
Control panel
00.Comp5+MacOG.book Page 13 Thursday, December 13, 2007 10:14 AM