Blaupunkt KIEL CD36 - Manual (Page 16)

38
“RPT OFF” appears briefly in the dis-
play and the RPT symbol disappears.
Normal playback is then resumed.
Pausing playback (PAUSE)
➮
Press button 3 :.
“PAUSE” appears in the display.
Cancelling pause
➮
Press button 3 : whilst pause
is activated.
Playback is resumed.
Configuring the display
You can choose between two display
types for CD mode:
● Track number and clock time
● Track number and playing time
➮
Press the MENU button 8.
➮
Press the or button 7 re-
peatedly until “CD DISP” appears
in the display.
➮
Press the or button
7 to
switch between “PLAY TIME” and
“CLOCK”.
➮
Press the MENU button 8 twice.
Traffic announcements in CD
mode
If you wish to receive traffic announce-
ments whilst CD mode is activated,
➮
press the TRAF button
6.
Traffic announcement priority is active
when the traffic-jam symbol lights up
in the display. For further details, please
read the “Traffic information reception”
chapter.
Cancelling MIX
➮
Press the 5 MIX button
: again.
“MIX OFF” appears briefly in the dis-
play and the MIX symbol disappears.
Scanning tracks (SCAN)
You can scan (briefly play) all the tracks
on the CD.
➮
Press and hold down the MENU
button
8 for longer than two sec-
onds.
The next track will then be scanned.
Note:
● You can set the scanning time.
For further details, please read the
section entitled “Setting the scan-
ning time” in the “Radio mode”
chapter.
Cancelling SCAN and continuing
listening to a track
➮
To cancel scanning, press the
MENU button
8.
The currently scanned track will then
continue to be played normally.
Repeating tracks (REPEAT)
If you want to repeat a track,
➮
press the 4 RPT button
:.
“RPT TRCK” appears briefly in the dis-
play and the RPT symbol lights up. The
track is repeated continuously until you
deactivate RPT.
Cancelling REPEAT
If you want to cancel the repeat func-
tion,
➮
press the 4 RPT button
: again.
CD MODE
02Kiel_MalagaCD36 gb 15.02.2006, 11:59 Uhr 38