Cd-changer mode clock time – Blaupunkt KIEL CD36 User Manual

Page 19

Advertising
background image

41

DANSK

ENGLISH

DEUTSCH

FRANÇAIS

IT

ALIANO

NEDERLANDS

SVENSKA

ESP

AÑOL

PORTUGUÊS

Cancelling SCAN

To stop scanning,

briefly press the MENU button

8.

The currently scanned track will then
continue to be played normally.

Note:

You can set the scanning time.
For further details, please read the
section entitled “Setting the scan-
ning time” in the “Radio mode”
chapter.

Pausing playback (PAUSE)

Press button 3

:.

“PAUSE” appears in the display.

Cancelling pause

Press button 3

: whilst pause

is activated.

Playback is resumed.

CLOCK time

Displaying the clock time

To display the clock time briefly,

Press and hold down the SRC
button

2 until the clock time ap-

pears in the display.

Setting the clock time

To set the clock time,

press the MENU button

8.

Press the or button

7 re-

peatedly until “CLOCK SET” ap-
pears in the display.

Press the button

7.

The clock time appears in the display.
The hours flash and can be adjusted.

Adjust the hours using the /
buttons

7.

Once the hours are set,

press the button

7.

The minutes flash.

Adjust the minutes using the /
buttons

7.

Press the MENU button

8 twice.

Selecting 12/24-hour clock
mode

Press the MENU button

8.

“MENU” appears in the display.

Press the or button

7 re-

peatedly until “24 H MODE” or “12
H MODE” appears in the display.

Press the or button

7 to

switch between the modes.

CD-CHANGER MODE

CLOCK TIME

02Kiel_MalagaCD36 gb

15.02.2006, 11:59 Uhr

41

Advertising