Blaupunkt MILANO MP26 - Manual (Page 11)

38
The RDS function is active if the RDS symbol
appears on the display.
Switching REGIONAL on/off
u Press the MENU button 5.
u Press the or button 8 repeatedly
until "REG" appears on the display. "OFF"
or "ON" is displayed alongside "REG".
To switch REGIONAL on/off,
u press the or button 8.
u Press the MENU button 5.
Selecting the waveband/memory
bank
This device can receive programmes broad-
cast over the FM frequency range as well
as the MW and LW (AM) wavebands. There
are three memory banks available for the
FM waveband (FM1, FM2 and FMT) and one
for each of the MW and LW wavebands.
Six stations can be stored in each memory
bank.
To switch between the FM memory banks
(FM1, FM2 and FMT) and the MW and LW
wavebands,
u briefl y press the BND•TS ; button.
Tuning into a station
There are various ways of tuning into a
station.
Automatic station seek tuning
u Press the or button 8.
The radio tunes into the next receivable
station.
Tuning into stations manually
You can also tune into stations manually.
Note:
You can only tune into stations manually
if the RDS function is deactivated.
u Press the or button 8.
Browsing through broadcasting
networks (FM only)
If radio stations provide several programmes,
you have the option of browsing through
these so-called "broadcasting networks".
Note:
The RDS function must be activated be-
fore you can use this feature.
u Press the or button 8 to switch
to the next station on the broadcasting
network.
Note:
When using this feature, you will only be
able to switch to stations that you have
received once before already. To receive
the stations, use the Scan or Travelstore
function.
Setting the sensitivity of station
seek tuning
You can choose whether the radio should
only tune into stations providing good recep-
tion or whether it can also tune into those
with a weak reception.
u Press the MENU button 5.
u Press the or button 8 repeatedly
until "SENS" and the currently set value
appears on the display.
"SENS HI6" means that the tuner is set to the
highest sensitivity setting. "SENS LO1" means
it is set to the lowest sensitivity setting.
Radio mode
02Milano_SRemoMP26_eng.indd 38 02Milano_SRemoMP26_eng.indd 38 06.01.2006 13:04:04 Uhr 06.01.2006 13:04:04 Uhr