Blaupunkt MILANO MP26 - Manual (Page 17)

44
Random track play (MIX)
u Press the 5 MIX button :.
"MIX CD" appears briefl y on the display
and the MIX symbol lights up. The next ran-
domly selected track will then be played.
Cancelling MIX
u Press the 5 MIX button : again.
"MIX OFF" appears briefl y on the display
and the MIX symbol disappears.
Scanning tracks (SCAN)
You can scan (briefl y play) all the tracks
on the CD.
u Press and hold down the MENU button
5 for longer than two seconds.
The next track will then be scanned.
Note:
You can set the scanning time. For fur-
ther information, please read the section
entitled "Setting the scanning time" in
the "Radio mode" chapter.
Cancelling SCAN and continuing
listening to a track
u To stop scanning, press the MENU button
5.
The currently scanned track will then con-
tinue to be played normally.
Repeating tracks (REPEAT)
If you want to repeat a track,
u press the 4 RPT button :.
"RPT TRCK" appears briefl y on the display
and the RPT symbol is displayed. The track
is repeated continuously until you deactivate
RPT.
CD mode
Cancelling REPEAT
If you want to cancel the repeat function,
u press the 4 RPT button : again.
"RPT OFF" appears briefl y on the display
and the RPT symbol disappears. Normal
playback is then resumed.
Interrupting playback (PAUSE)
u Press the button 3 :.
"PAUSE" appears on the display.
Cancelling pause
u During the pause, press the button 3
:.
Playback is continued.
Confi guring the display
You can select from two display types for
CD mode:
• Track number and time
• Track number and playing time
u Press the MENU button 5.
u Press the or button 8 repeatedly
until "CD DISP" appears on the display.
u Press the or button 8 to switch
between "PLAY TIME" and "CLOCK".
u Press the MENU button 5 twice.
02Milano_SRemoMP26_eng.indd 44 02Milano_SRemoMP26_eng.indd 44 06.01.2006 13:04:06 Uhr 06.01.2006 13:04:06 Uhr