Philips VisaCare Mikrodermabrasion - Manual (Page 9)

Charging
Charging the appliance
Charging the appliance takes approximately 8 hours. A fully charged
appliance has a cordless operating time of up to 30 minutes.
1 Make sure the appliance is switched off.
2 Insert the small plug in the socket of the charging stand and insert
the adapter in the wall socket.
3 Put the appliance in the charging stand.
, The charging light flashes white to indicate that the appliance is
charging.
, When the battery is fully charged, the charging light lights up white
continuously for 30 minutes. After 30 minutes, the light goes out.
Note: You can use the appliance before the battery is fully charged.
However, its performance and operating time will not be optimal in this case.
’Battery low’ indication
When the battery is almost empty, the charging light flashes amber for
4 seconds during use and after you have switched off the appliance.
The battery still contains enough energy for a complete 5-minute
treatment. When the battery is completely empty, the appliance switches
off automatically and the charging light flashes amber very quickly. It is
advised to charge the appliance immediately after use.
ENGLISH 9