Philips Epilier-Set – Limited Edition - Manual (Page 11)

Do not use the precision epilator to remove hairs that grow out of moles and
to epilate eyebrows and eyelashes.
cleaning and maintenance
Never use scouring pads, abrasive cleaning agents or aggressive liquids such as
petrol or acetone to clean the appliances.
Always keep the adapter dry. Never rinse it under the tap or immerse it in water.
- If necessary, clean the adapter with the cleaning brush or a dry cloth.
- After each wet use, clean the appliances thoroughly with water to ensure
optimum performance.
cleaning the epilator
1 Switch off and unplug the epilator.
2 Push the epilating head to the right (1) and remove it from the epilator
(2) (Fig. 20).
Note: Never try to detach the epilating discs from the epilating head.
3 Remove loose hairs with the cleaning brush (Fig. 21).
4 Rinse all parts under the tap and shake off excess water. (Fig. 22)
Note: Make sure all parts are completely dry before you reassemble the epilator.
cleaning the precision epilator
1 Clean the precision epilator regularly by removing loose hairs with the
cleaning brush. Do not switch on the appliance while brushing.
2 Rinse the precision epilator under the tap and shake off excess water. You can
also remove the epilating head by pulling it off the epilator for easier cleaning.
ordering accessories
If you need to replace a part or want to purchase an additional part, go to your
Philips dealer or visit www.shop.philips.com/service. If you have problems obtaining
the parts, please contact the Philips Consumer Care Centre in your country.
EnglisH 11