West Bend Back to Basics Coffeemaker - Manual (Page 4)

A
SSEMBLING
Y
OUR
C
OCOA
~L
ATTE
™
Lid
Pour Spout
Mixing Container
Dispensing Valve
Froth/Dispense
Cancel
Motor Base
“ON/OFF” Switch
Before using for the first time:
Wash the mixing container, dispensing valve, and
lid with warm, soapy water. Rinse thoroughly and dry. Note: Do not wash any parts
in the dishwasher and do not immerse the motor base or the mixing container in
water. This may permanently damage the product and void the warranty.
• A small amount of smoke and/or odor may occur upon heating due to the
release of manufacturing oils – this is normal.
• Some minor expansion/contraction sounds may occur during heating and
cooling – this is normal.
U
SING
Y
OUR
C
OCOA
~L
ATTE
™
Your Back To Basics
®
Cocoa~Latte
™
Hot Drink Maker is designed to make delicious,
hot, and frothy drinks using milk or water combined with instant cocoa, coffee, tea
mixes, and syrups.
The measurements used below produce four 8-ounce servings (32 ounces). Refer
to the Ingredients Chart to determine usage for alternate serving sizes.
1. Remove the lid from the mixing container.
2. Pour 32 ounces of water or milk into the mixing container. Note: Do not fill the
mixing container past the 32 ounce “Maximum Fill” line.
3. Add 8 tablespoons of your favorite instant mix.
4