Bowflex Ultimate 2 - Manual (Page 8)

8
step
8
Parts:
• Rack assembly from Step 6
• Flex Bag (#8)
• Color-coded Dots (6 pairs)
7-1 Fasten the Flex Bag (#8) to the Side Tube uprights below the Curl Bars, using the hook-and-loop straps.
See Figure 7.
7-2 The pairs of colored dots will identify the storage locations for the Bowflex Ultimate® 2 accessory equip-
ment listed in the guide chart below. As you peel each pair of dots from the paper backing, place one dot
on the accessory and the other on its holder on the rack. See Figure 7.
Location Accessory
A Ab Crunch (optional attachment)
B Leg Extension
C Leg Extension Seat
D Preacher Curl Assembly
E Squat Attachment
F Tall Seat Back
Figure 7
�
�
�
�
�
�
�
Parts:
• Rack assembly from Step 7
Tools:
• Allen wrench (7/32”)
• Wrench/Socket (9/16”) or Open End Wrench
8-1 Now that you have assembled your Bowflex Ultimate® 2 Accessory Rack, it is very important to tighten
all hardware and visually inspect the rack. Make sure that your Bowflex Ultimate® 2 Accessory Rack
has been assembled correctly and securely.
� � � � � � �
� � � � � � � � �
� � � � � �
�������������������������
� � � � � � �
To avoid damage to equipment or
injury, store Bowflex Ultimate® 2
accessories only in their designated
holders on the rack.
step
7