Blaupunkt Alicante CD32 - Manual (Page 10)

31
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
When you have finished making your
changes,
➮
press the MENU button
7
twice.
Instantaneous volume reduction
(mute)
This feature allows you to instantane-
ously reduce (mute) the volume to a lev-
el preset by you.
➮
Briefly press button
2
.
“MUTE” appears in the display.
Setting the mute level
You can set the unit’s mute volume lev-
el.
➮
Press the MENU button
7
.
➮
Keep pressing the or button
5
until “MUTE LVL” appears in
the display.
➮
Set the mute level using the and
buttons
5
.
When you have finished making your
changes,
➮
press the MENU button
7
twice.
Telephone audio / navigation
audio
(only on the Santa Cruz CD32)
If your car radio is connected to a mo-
bile telephone or a navigation system,
the unit’s volume will be muted as soon
as you “pick up” the telephone or as
soon as a navigation announcement is
made. The caller or voice output will
then be heard over the car radio loud-
speakers. In order for this to work, the
mobile telephone or navigation system
must be connected to the car radio in
the manner described in the installation
instructions.
You can find out from your Blaupunkt
dealer which navigation systems can be
used with your car radio.
If a traffic information message is re-
ceived during a telephone call or whilst
a navigation announcement is being
made, the traffic message will only be
played after the call or voice output is
finished.
If you are already listening to a traffic
announcement and a telephone call
arrives or the navigation system wish-
es to make a voice output, the traffic
announcement will first be heard. Once
the traffic message is finished, you can
listen to the call or the voice output.
You can set the volume level at which
telephone calls and the navigation voice
output will first be heard.
➮
Press the MENU button
7
.
➮
Keep pressing the or button
5
until “TEL VOL” appears in the
display.
➮
Set the required volume using the
and buttons
5
.
When you have finished making your
changes,
➮
press the MENU button
7
twice.
Note:
●
Using the volume control
3
, you
can directly adjust the volume of
telephone calls and navigation
voice output (whilst they are being
heard).
ADJUSTING THE VOLUME