Blaupunkt Alicante CD32 - Manual (Page 13)

34
Tuning into stations manually
You can also tune into stations manual-
ly.
Note:
●
You can only tune into stations
manually if the RDS function is de-
activated.
➮
Press the or button
5
.
Browsing through broadcasting
networks (only FM)
If a radio station provides several pro-
grammes, you have the option of brows-
ing through its so-called “broadcasting
network”.
Note:
●
If you want to use this feature, the
RDS function must be activated.
➮
Press the or button
5
to
switch to the next station on the
broadcasting network.
When using this feature, you will only
be able to switch to stations that you
have received once already. To do so,
use either the Travelstore function or
allow the automatic seek tuning feature
to run once through the entire frequen-
cy range.
Storing stations
Storing stations manually
➮
Select the required FM1 / FM2 /
FMT memory bank or MW / LW
waveband (MW and LW are not
available on the Kiel CD32).
➮
Tune into the station.
➮
Press one of the station buttons 1 -
6
:
for longer than one second to
store the station to that button.
Storing stations automatically
(Travelstore)
You can automatically store the five sta-
tions with the strongest reception in the
region (only for FM). The stations are
stored in the FMT memory bank.
Note:
●
Stations that were previously
stored in this memory bank are de-
leted in the process.
➮
Keep the BND•TS button
<
pressed for longer than two sec-
onds.
The station storing procedure begins.
“T-STORE” appears in the display. After
the process is completed, the station
stored in FMT memory location 1 will
be played.
Listening to stored stations
➮
Select the memory bank on which
the station was stored.
➮
Press the station button of the sta-
tion you want to listen to.
Scanning receivable stations
(SCAN)
You can briefly play all the receivable
stations. You can set the scanning time
to between 5 and 30 seconds in the
menu.
RADIO MODE