Barnett Crossbows Penetrator 350 - Manual (Page 13)

13
Troubleshooting
Arrow Flight
The greatest variable in accuracy are arrows, as they differ greatly
and have totally different flight characteristics.
Generally speaking, when practicing with field points, target
arrows are more accurate than hunting arrows. Fixed blade
broadheads used in hunting tend to cause the arrow to “plane”
due to their large surface area. To help overcome this, we
suggest practicing well in advance of hunting season with the
type of arrows that will be used to achieve consistent groupings.
Consider the following when selecting arrows; heavier arrows
hold more energy for humane harvesting at reasonable ranges
(15-35 yards). Lighter arrows are much faster but hold less
energy.
• If the string has been changed, is it a Barnett string?
• Are the arrows straight and fletches (vanes) in good condition?
• Does the arrow lie flat on the flight groove? Is the arrow retainer
spring too tight or twisted? (refer to adjustment instructions on
page 10).
• Does the arrow slide smoothly and evenly into the trigger
mechanism?
• When cocking your crossbow, are you pulling equally on
each side of the string? After cocking the crossbow, make
sure the marks are shown evenly on each side of the trigger
mechanism. Remember to mark new strings on each side of
the flight track (as stated earlier).
• When cocking your crossbow, make a conscious effort to hold
the string on the flight track so to prevent it from lifting over
the arrow retainer spring.
• Is the odd colored fletch placed down in the flight groove?
• Are the nocks damaged?