Philips 46PFL5605H-12 - Manual (Page 50)

EN 50
Channel decoder
NonPu blish
Before using a SCART digital channel
decoder, select the channel to decode and
assign the decoder to the SCART connector.
1. Press .
2. Select [Setup] > [Channel settings] >
[Decoder] > [Channel].
3. Set the channel you want to decode.
4. Select [Status], then the location of the
decoder.
5. Press OK.
PC
NonPu blish
Connect a computer using one of the following cables:
HDMI cable
DVI-HDMI cable