Philips 32PT9100D-37B - Manual (Page 9)

9
HOW TO USE THE TUNER MODE CONTROL
When CABLE is selected, channels 1-125 are
available.
When ANTENNA is selected, channels 2-69 are
available.
Use the A/D button on the Remote Control to switch
between Digital and Analog channels.
H
ELPFUL
H
INTS
T
he TUNER MODE control lets you change the TV input signal to ANTENNA or CABLE mode. It is important
T T
that you know which type of signal to look for (Cable TV or Antenna).
T T
1
Press MENU on the remote
control to display the
onscreen menu.
2
Press CURSOR <
or > to scroll though the
onscreen menu until you see
Install highlighted.
3
Press CURSOR > to
display the Install menu
features.
4
Press CURSOR < or >
to scroll through the Install
features until you see Tuner
Mode highlighted.
5
Press CURSOR > to
select Antenna or Cable.
6
When finished, press
MENU twice to exit the
menu from the TV screen.
1
Press MENU on the
remote control to display
the onscreen menu.
2
Press CURSOR < or >
to scroll though
the onscreen
menu until you see
Install highlighted.
3
Press CURSOR > to
display the Install menu
features.
4
Press CURSOR < or > to
scroll through the Install
features until you see Tuner
Mode highlighted.
5
Press CURSOR > to
select Antenna or Cable.
6
When finished, press
MENU twice to exit the
menu from the TV screen.
Follow these steps for Digital Mode Follow these steps for Analog Mode
MENU
>
>
< >
Digital Mode Analog Mode Analog Analog