English française español, Video camera/games console to tv, Side connections - usb/headphone – Philips digital widescreen flat TV 37PFL5332D 37" LCD integrated digital with Pixel Plus 3 HD User Manual

Page 27: Digital surround receiver, Viewing content from a usb device

Advertising
background image

23

4

Video Camera/Games Console to TV

USB

Source Button

1

2

3

1

Using Composite Audio/Video Input

& Connect the video cable (yellow) from the camera (or other devices) to

the video input of the TV Side Jack panel.

OR

Connect the S-video cable from the camera (or other devices) to the TV
Side Jack panel.


é Connect the red and white audio cables from the device into the audio

AV inputs of the TV.

Tip: For mono devices, connect only the white audio cable from the device's
audio output to the white audio input of the TV.

“ Turn the TV and device on. Press the Source button on the remote

control until the connected source Side appears on the TV screen.

Press PLAY on the device to verify the connection.

Note: Interference will occur when S-video and Composite audio/video are
connected at the same time.

Headphone

&

Insert the plug into the headphone socket

*

as shown.

é

Press the

MUTE

button on the remote control to switch off the internal

loudspeakers of the TV.

The headphone impedance must be between 8 to 4000 Ohm. The headphone
socket is a 3.5 mm jack.

In the Sound menu, select

Headphone volume

to adjust the headphone

volume.

Side connections - USB/Headphone

Viewing content from a USB device

Inserting a USB device

Note: USB devices are not supplied with this TV.

Insert a USB device in the

USB

connector at the side of the TV.

When a USB device is inserted, the Multimedia browser menu will be
displayed automatically.

Removing the USB device

&

First by switching off the menu. To do so, navigate to the Multimedia
browser menu and press the MENU button to exit the menu.

é

Remove the USB device.

USB

The TV can output Digital audio via the

AUDIO OUT (DIGITAL)

connector to an external amplifier or receiver.

If your amplifier or receiver has a matching connector for Digital Audio In,
you can connect it with a single cable to the TV’s

AUDIO OUT (DIGITAL)

.

Connect a Digital MultiChannel Surround receiver to the

AUDIO OUT

(DIGITAL)

connector at the bottom of the TV.

Digital Surround receiver

Back of TV

English

Française

Español

Next Source

AV 2

TV

AV 1

HDMI 2

Side

HDMI 1

Advertising