Billion Electric Company BIPAC 7300(G) - Manual (Page 20)

3.3 LAN and WAN Port Addresses
The parameters of LAN and WAN ports are preset at the factory. The default values are
shown below.
LAN Port WAN Port
IP address 192.168.1.254
Subnet Mask 255.255.255.0
DHCP server function Enabled
IP addresses for
distribution to PCs 100 IP addresses continuing from
192.168.1.100 through
192.168.1.199
The PPPoE function is
enabled to
automatically get the
WAN port
configuration from the
ISP, but you have to
set the username and
password first.
3.4 Configuring with your BiPAC 7300(G)
1. To configure this device, you must have IE 5.0 / Netscape 4.5 or
above installed
2. You may configure the router for Internet access in two ways:
(A) Easy Sign-On (EZSO) (B) Web Configuration
Easy Sign On:
User just installs all of cables and uses the browser to surf Internet. At this time, the EZSO
WEB GUI will be popped up and request you to input some basic information you get from
ISP. After this, you can surf Internet right away.
18