Billion Electric Company BIPAC 7300(G) - Manual (Page 97)

Follow the steps below to access web configuration.
Step 1: Click Start and then Control Panel.
Step 2: Double-click Network Connections.
Step 3: Select My Network Places under Other Places.
Step 4: An icon describing each UPnP-enabled device shows under Local Network.
Step 5: Right-click on the icon of your BiPAC 7300(G) and select Invoke. The web
configuration login screen displays.
Step 6: Right-click on the icon of your BiPAC 7300(G) and select Properties. A properties
window displays basic information about the BiPAC 7300(G).
4.3.7.5 IGMP
IGMP, known as Internet Group Management Protocol, is used to management hosts from
multicast group.
IGMP Proxy: Accepting multicast packet. Default is set to Disable.
IGMP Snooping: Allowing switched Ethernet to check and make correct forwarding
95