Philips 50PF9731D-37 - Manual (Page 39)

English
User Man
ual
The Multimedia browser lets you display pictures or play audio
files stored on a USB device or a memory card.The Multimedia
browser application is invoked from the My Contents menu
when a USB device is inserted.
1. Press the MY CONTENT/OPTION button on the remote
control.
>
The Quick access menu appears.
2. Select My Content and press the OK button.
> The My Content menu appears.
3. Press the cursor down to select Multimedia.
4. Press the cursor right and select the USB device inserted
into the USB connector at the side of the TV.
5. Press the cursor right and select a content type.
- Following types of memory cards can be read:
Compact Flash I & II, Memory Stick, Memory Stick PRO, SD
Card, Smart Media, Micro Drive, MultiMedia Card.
- Following file formats can be reproduced:
• For pictures: JPEG
• For audio: MP3, MP3 Pro
- Only FAT/DOS-formatted memory devices are supported.
- If your digital camera is not supported, try one of the
following solutions:
- Make sure your camera is switched on and verify if its
configuration settings are correct (see the manual of your
camera).
- Remove the memory card from your camera and insert it in
the memory card slot. Refer to www.philips.com/support for
more information.
- Philips cannot be responsible if your USB device or memory
card is not supported.
37
Multimedia Browser
GUIDE GUIDE
MY CONTENT MY CONTENT
FORMAT
POWER
FAV FAV
MUTE
SOURCE
..
MY CONTENT MY CONTENT
Quick access
My Content
(Un)Mark
Digital audio language
Closed caption
Picture format
Equalizer
PIP format
Clock
EPG (Electronic Program Guide) (only with Digital TV channels)
The Electronic Program Guide shows you detailed information
about the current program and also about the next program (if
this information is available).
1. Press the GUIDE button.
> The EPG screen appears. Dependent on conditions it
may take some time to acquire EPG data.
> The EPG screen updates automatically if the EPG data is
acquired successfully. If not, the EPG screen remains
blank.
> Information about the selected program appears.
< Use the colored buttons to activate the available EPG
features displayed at the bottom of the screen.
2. To quit the Program Guide page, press the GUIDE button
again.
Note: these instructions may differ according to the type of
Electronic Program Guide.
GUIDE GUIDE
MY CONTENT
FORMAT
POWER POWER
FAV FAV
MUTE
SOURCE
...
.
GUIDE GUIDE