A recorder and cable box with rf output 46, Connect a recorder and cable box with rf output, Jack 3 to the recorders – Philips 50PF9731D-37 User Manual
Page 48: Input, Input of, And connect the audio cables to the, Input jacks of, When using the, Connector do not connect any device to the
Connect a recorder and Cable box with RF output
L
Pr
H
R
Pb
V
DIGITAL
AUDIO
IN
Y
Pr
Pb
Y
S-VIDEO
S-VIDEO
AV2
AV3
AV1
VIDEO
L
R
VIDEO
ANTENNA
75
o
CABLE
Cable box
RECORDER
OUT
IN
OUT
IN
SIGNAL
SPLITTER
4
2
1
AV2 :
L + R + VIDEO
3
46
1. Use an optional signal splitter.
2. Connect one of the cable TV signal splitter outputs 1 to the cable box’s
IN
jack.
3. Connect the other cable TV signal splitter output 2 to the
CABLE/ANTENNA 75 Ω
x plug on
the bottom of the TV.
4. Connect the cable box’s
OUT
jack 3 to the recorders
RF IN
socket.
5. Connect the Video, Audio Left and Right (only for stereo sound) recorder AV cables 4 to the
VIDEO
,
AUDIO L
and
R
input
AV2
jacks on the TV.
6. Select the equipment you have connected in the Setup menu, Select your source, p. 24 and link
it to the
AV
connector you have connected your equipment to.
Notes:
- cables are often color-coded to connectors. Connect red to red, white to white....
- if your recorder has an S-VHS video jack:
For improved picture quality, connect an S-video cable with the
S-VIDEO
input of
AV2
and connect
the audio cables to the
AUDIO L
and
R
input jacks of
AV2.
When using the
S-VIDEO
connector do not connect any device to the
AV2 VIDEO
jack;
- in case of mono equipment, only the left loudspeaker reproduces sound.
Use a mono to stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.