Controls installation – Philips AJ3720-17B User Manual

Page 6

Advertising
background image

CONTROLS

INSTALLATION

6

English

1. Check if the power voltage as shown on the type plate (on the

bottom of the set) corresponds to your local power voltage. If
it does not, consult your dealer or service organisation.
™ If your set is equipped with a voltage selector, found on the

bottom right-hand corner of the set, adjust the selector to
correspond with your local power.

2. Connect the power plug to the wall outlet.

– The AC power supply is now switched on and the numbers

on the display will start to flash. You will need to set the
correct time.

3. To switch off the AC power supply completely, pull the power

plug out of the wall outlet.

POWER CONNECTION

1 REPEAT ALARM/

TIME DATE

:

– To switch off the alarm for a 9 minute

period.

– To display/adjust the date (month and day)

and the year

– To resume clock time display
2 DISPLAY: To show the status of the set
3 PRESET 1-5:
– To select a preset radio station
– To select a preset radio alarm
4 ALARM RESET/RADIO OFF:
– To stop the active alarm for 24 hours
– To switch off alarm 1 or 2 completely
– To switch off the radio
5 SLUMBER/BUZZER
– To adjust the slumber time on/off
– To select the buzzer mode for alarm 1 or 2
6 RADIO ON
– To switch on the radio
– To go to radio display for 10 seconds
– To select the radio mode for alarm 1 or 2
7 BAND: To select the waveband

8 ALARM 1:To set, review or switch off alarm 1

ALARM 2: To set, review or switch off alarm 2

9 VOLUME: To adjust the radio sound level
0 TUNING /

∞ or § (up or down)

– To tune to radio stations automatically or

manually

– To adjust the clock time, alarm time, date,

year

! p: 3.5 mm headphone jack
@ WEEKEND SLEEPER
– To activate or deactivate the weekend

sleeper for alarm 1 or 2

# SET:
– To confirm preset stations stored
– To activate the setting mode for clock time
$ BRIGHTNESS CONTROL: To change the

brightness of the display illumination

% Pigtail: For FM reception
^ MAINS: for connecting the set to the power

supply

TOP, FRONT and SIDE PANEL

SLUMBER

SUN MON TUE WED THUR FRI SAT

ALM 2

ALM 1

MW
FM

MHz

ZZ

ZZ

kHz

AM

PM

P1 P2 P3 P4 P5

XP AJ 3720/17.2 29-03-2001 10:47 Pagina 6

Advertising