Philips 60PP9910-17 - Manual (Page 30)

C OMPATIBILITY I NFORMATION FOR HD I NPUTS
Y our set’s HD inputs (HD INPUT-AV 3, HD
INPUT-AV 4 and HD INPUT-AV 5) are
designed to accept high-definition signal stan-
dards 480p, 480i, 720p and 1080i as speci-
fied by the Electronic Industries Association.
Output standards may vary by manufacturer.
Refer to the directions-for-use manual for the
digital source equipment before connecting.
Your TV’s HD input jacks are compatible
with some digital equipment having RGB out-
puts with “sync on green” or RGB with “sepa-
rate H and V sync.” As with HD component
video signals, output standards may vary by
manufacturer. Refer to the directions-for-use
manual for the receiver before connecting.
• No industry standards have
been established for HD televi-
sion RGB signal systems, timing,
synchronization, and signal
strengths. The HD INPUT-AV
3 or 4 RGB inputs on your
Philips TV will not be compati-
ble with all digital equipment
that offers RGB outputs. If the
digital equipment you want to
connect offers both compo-
nent video and RGB, compo-
nent video is the suggested
type of connection to use.
• Your TV’s onscreen INSTALL
submenu provides the option
of switching the AV3 or 4 sig-
nal source between YPbPr and
RGB color-space settings. The
option is available only when
you have selected the AV3 or
4 signal source (using the AV
button on the remote or the
Source Select button on the
TV). The default setting for
AV3 and 4 is YPbPr.
H
ELPFUL
H
INTS
HD INPUT-AV 3 and 4
When the Inputs Are Used with
Component Video Signals
Y INPUT: 1.0 Vp-p (includes sync), 75
ohms
Pr INPUT: 700m Vp-p, 75 ohms
Pb INPUT: 700m Vp-p, 75 ohms
NOTES:
The Pb INPUT jack can also receive sig-
nals from outputs labeled Cb or B-Y.
The Pr INPUT jack can also receive sig-
nals from outputs labeled Cr or R-Y.
When the Inputs Are Used with
RGB Video Signals
G/Y: 1.0 Vp-p, 75 ohms (compatible
with sync on green)
R/Pr: 700 mVp-p, 75 ohms
B/Pb: 700 mVp-p, 75 ohms
H: 3 Vp-p ± 1.0 V, 1 kohm (when using
separate H and V sync)
V: 3 Vp-p ± 1.0 V, 1 kohm (when using
separate H and V sync).
HD INPUT-AV 5
This input accepts an HDMI connector.
Audio jacks are provided for connecting
a DVI device using a DVI to HDMI con-
verter cable.
26