Philips 60PP9910-17 - Manual (Page 8)

1 Connect the incoming cable TV signal to a signal splitter (not sup-
plied).
The signal splitter enables you to avoid having to use the TO TV
jack on the back of the cable box. This jack will not supply stereo
sound to the TV.
2 Connect a coaxial cable to a connector on the signal split-
ter and to the CABLE jack on the TV and connect a coax-
ial cable to a connector on
the signal splitter and to the
CABLE IN jack on the back of the cable box.
3 Connect the YPbPr (component) VIDEO OUT jacks from the
Cable Box to the AV 4 YPbPr (component video) jacks on the rear
of the TV. Connect the AUDIO OUT L(eft) and R(ight) jacks from
the Cable Box to the AV 4 AUDIO jacks on the rear of the TV.
1-2-3 HDTV - 1 Getting Connected
D
Digital Cable Box with AV Output
4