Philips DVDR150099 - Manual (Page 15)

English
INSTALLATION 15
S-Video (Y/C) connection
If your TV is not equipped with COMPONENT VIDEO
inputs, connect the DVD Recorder with the
S-Video (Y/C) jacks.
l Connect the S-Video (Y/C) OUT jacks to the
corresponding IN jacks on the TV, using the
S-Video cable supplied (3) as shown in the drawing.
l Connect the AUDIO Left (white) and Right (red)
OUT jacks to the corresponding IN jacks on the TV
using the audio cable supplied (4).
Video (CVBS) connection
If your TV is not equipped with S-Video jacks, then
connect the DVD Recorders VIDEO (CVBS) jack to
your TV.
l Connect the VIDEO (CVBS) OUT jacks (yellow) to
the corresponding IN jacks on the TV using the
video cable supplied (5) as shown in the drawing.
l Connect the AUDIO Left (white) and Right (red)
OUT jacks to the corresponding IN jacks on the TV
using the audio cable supplied (4).
Step 3: Connecting to audio
equipment
Connecting to an A/V receiver or A/V
amplifier with a digital Multi-channel decoder
The best possible sound quality is obtained by
connecting your DVD Recorder to an Audio/Video
receiver with Multi-channel decoder (Dolby Digital,
MPEG 2 and DTS).
Digital Multi-channel sound
A digital Multi-channel connection provides the optimum
sound quality. For this you need a Multi-channel A/V
receiver that supports one or more of the audio types
supported by your DVD Recorder (MPEG 2, Dolby
Digital and DTS). Check the receiver manual and the
logos on the front of the receiver.
l Connect one of the DVD Recorder’s DIGITAL
AUDIO OUT jacks to the corresponding IN jacks
on the receiver. Use a digital coaxial cable (6) or a
digital optical audio cable (7).
If you do not have a digital coaxial audio cable, you
may use the supplied yellow video cable.
Note:
If you use a connection that does not match the capabilities
of your receiver, the receiver will produce a strong, distorted
sound. The audio type of the current DVD disc will appear in
the Status Window when you change the language. Six
Channel Digital Surround Sound via digital connection can
only be obtained if your receiver has a Digital Multi-channel
decoder.
Apparatus Claims of U. S. Patent Nos. 4,631,603, 4,577,216, 4,819,098, and 4,907,093 licensed for limited viewing uses only.
COMPONENT VIDEO PROG
SCAN
EXT 2
Y Y
P B P B
P R
Y
L
L L
R R R
P B
P R P R
EXT 3 EXT 3
EXT 1 EXT 1/2
IN RC 6
AMPLIFIER
7 6
TV
1 5 3
Apparatus Claims of U. S. Patent Nos. 4,631,603, 4,577,216, 4,819,098, and 4,907,093 licensed for limited viewing uses only.
COMPONENT VIDEO PROG
SCAN
EXT 2
Y Y
P B P B
P R
Y
L
L L
R
R R
P B
P R P R
EXT 3 EXT 3
EXT 1 EXT 1/2
IN RC 6
4
TV
1
5
Apparatus Claims of U. S. Patent Nos. 4,631,603, 4,577,216, 4,819,098, and 4,907,093 licensed for limited viewing uses only.
COMPONENT VIDEO PROG
SCAN
EXT 2
Y Y
P B P B
P R
Y
L
L L
R R R
P B
P R P R
EXT 3 EXT 3
EXT 1 EXT 1/2
IN RC 6
4
3
TV
1