Philips 9FF2M4-37 - Manual (Page 65)

Philips Electronics - 64 -
6.2 Taking Care of Photo Frame
1) Do not drop
Photo Frame is a complicated electronic device and cannot withstand shock from being
dropped.
2) Do not expose to moisture
Photo Frame is neither moisture proof nor moisture resistant. Exposing it to moisture
or liquid of any kind will very likely damage your Photo Frame.
3) Do not hit or scratch
The LCD panel of Photo Frame is made of glass and is therefore sensitive to abnormal
force and sharp edges.
4) Screen cleaning
Use only a dry soft cloth to clean your screen.
5) Battery charging
For first time use, fully charge your Photo Frame (Battery LED will be off when battery
is fully charged). This process may take up to 3 hours or more. Photo Frame starts fully
recharging its internal battery only when the battery level is below certain value. This is
designed to extend your Photo Frame battery life by reducing unnecessary battery
charging.
6) Keep the stand clear from cables
Make sure the stand of your Photo Frame is clear from cables as cables could pull the
stand out of Photo Frame to the floor.
7) Temperature and humidity limitations
Operating temperature: 0° ~ 45° (Celsius) / 32° ~ 113° (Fahrenheit)
Humidity: 20% ~ 80%