Philips 9FF2M4-37 - Manual (Page 9)

Philips Electronics - 8 -
1.2.5 Setting Time, Date and Clock
Use this function to set the time and date of the PhotoFrame™.
Press the menu button to access the Main Menu.
Navigate down to highlight the setup icon.
Navigate right or press the OK button to access the setup menu.
Navigate down to Clock.
Navigate right to access the Time settings.
Time:
Navigate up and down to select the time.
Navigate left and right to move between hours, minutes and AM/PM.
Press the OK button to confirm selection.
Date:
Navigate up and down to select the date.
Navigate left and right to move between days, months and years.
Press the OK button to confirm selection.
Show Clock:
If you want to use the PhotoFrame™ as a clock
Navigate up and down to select Show clock
Navigate right then up and down to select No Clock ,Full Screen , In
Slideshow or Both
Press the OK button to confirm selection.
Press Play Slideshow to leave this menu and play the slideshow
NOTE: The time and date must be set before the Event Reminder and Auto on/off functions
can be set.
Note 2: Show clock
You can have a clock displayed on the screen on the top of your pictures in Slideshow and
browse mode.