Philips 29PFL4908-F7 - Manual (Page 95)

Manually enter your SSID
Set up the connection to the AP (e.g. wireless router) manually by entering
the SSID.
4
Use H I to select Manually enter your SSID, then press OK.
●
AP (e.g. wireless router) SSID entry screen will appear.
Enter the SSID using H I J K, then press OK.
5
Use H I to select the authentication setting of the selected wireless
network.
● For a wireless network with authentication setting, select the
authentication setting, according to the security type of the
wireless network.
XXXXXXXXXXXXXX
WEP
None
Manually enter your SSID
Auto
WPA/WPA2
None Set the authentication setting to None.
WEP Set the authentication setting to WEP
*
.
WPA/WPA2 Set the authentication setting to WPA/WPA2
●
For a wireless network without authentication setting, select None.
●
If you select WEP
*
or WPA/WPA2, WEP
*
/ WPA / WPA2 Key entry
screen will appear. Enter the WEP * / WPA / WPA2 key of the selected
wireless network using H I J K, then press OK.
●
Confirmation message will appear. Select Yes to complete the settings.
* WEP is not recommended to be used due to its Major security flaws.
Change the Security protocol on the wireless router to WPA or WPA2
(recommended) mode.
IP configuration
In following cases, select IP configuration to set each setting as necessary.
– When connection test failed with the setting of Connection test.
–
When instructed by your Internet service provider to make specific
settings in accordance with your network environment.
3
Use H I to select IP configuration, then press OK.
4
Use H I to select a setting, then press OK.
192.168.11.3
255.255.255.0
192.168.11.1
192.168.11.1
0.0.0.0
00:12:0E:10:09:15
Manual
MAC address
Secondary DNS
Primary DNS
Default gateway
Subnet mask
IP address
IP setting mode
Proxy configuration
IP configuration
Wireless network setting
Network selection
IP setting
mode
Auto Sets the IP setting automatically.
Manual Sets the IP setting manually.
IP address
*1, 3
A set of numbers which are assigned to
devices participating in a computer
network.
Subnet mask
*1, 3
A mask which is used to determine what
subnet an IP address belongs to.
Default gateway
*1, 3
IP address of the network device (such as
router) which provides Internet access.
DNS
setting
mode
Auto Sets the DNS setting automatically.
Manual Sets the DNS setting manually.
Primary DNS
*2, 3
A server which handles the name and IP
address over the Internet.
Secondary DNS
*2, 3
A server which handles the name and IP
address over the Internet.
MAC address
An address which recognizes the devices
connecting to the network. It is also called
Hardware Address.
*1 Items can be selected only when IP setting mode is set to
Manual.
*2 Items can be selected only when DNS setting mode is set to
Manual.
*3 Use H I or the NUMBER buttons to input numbers. When you
use H I to input numbers, then press OK or input the triple digits
by using the NUMBER buttons, the cursor moves to the next entry
field. When you use H I to input numbers, then press OK or input
the triple digits by using the NUMBER buttons at the rightmost
entry field, numbers will be stored and go back to the previous
menu.
39 .
English
Continued on next page.