Philips 1160X-42 - Manual (Page 12)

ENGLISH
C
2 Insert the raised notch of the trimmer into
the slot in the top of the razor ( 1). Press the
trimmer down to attach it to the razor (2).
You will hear a ‘click’.
3 Turn razor ON.
The display lights up for a few seconds (Model
1180X only).
4 Hold trimmer to exact hairline desired.
Move trimmer downward with gentle
pressure.
5 Trim beard, moustache or sideburns using
the trimmer.
6 Turn razor OFF when finished.
The display lights up for a few seconds and then
shows the remaining battery capacity (Model
1180X only).
7 Thoroughly clean the trimmer after using
(see ‘Cleaning’).
C
8 Pull the trimmer straight off the razor.
NOTE: Do not turn the trimming unit while you
pull it off the razor.
C
9 Insert the raised notch of the shaving unit
into the slot in the top of the razor ( 1).
Press the shaving unit down to attach it to
the razor (2). You will hear a ‘click’.
22 ENGLISH
C
10 Put the Protective Razor Head Cap on the
razor.
Travel Lock
If you are going to store the razor for a longer
time period or if traveling, it is possible to lock
the razor. The travel lock prevents the razor from
being switched on by accident.
Activating the travel lock
C
1 Press the ON/OFF button for 3 seconds.
◗ Model 1180X only, the top charging light
blinks, then the second charging light and so
on.
C
◗ The lock symbol appears on the display.
NOTE: The displays of models 1180X, 1160X,
1160XCC and 1150X look different, but show
the same symbol.
2 The travel lock has now been activated.
Deactivating the travel lock
1 Press the ON/OFF button for 3 seconds.
23
3 sec