Philips 1160X-42 User Manual

Page 16

Advertising
background image

ENGLISH

The razor will stay in one position until the

end of the drying program.

Do not press the ON/OFF button while the

cleaning cycle is running. If this does occur, the

cleaning cycle will stop and the razor holder

will automatically move to the starting

position. The cleaning cycle can be re-started

by pressing the ON/OFF button once.

If the power plug is disconnected before the

cleaning cycle is complete, the razor holder will

remain in its current position. Reconnect the

plug into the outlet or Jet Clean System and the

razor holder will automatically move to the

highest position. The cleaning cycle can be

re-started by pressing the ON/OFF button

once.

C

NOTE: If the cleaning solution level drops below

the minimum level during the cleaning cycle, the

‘cleaning chamber empty’ symbol will blink and

razor holder returns the razor to the starting

position, stopping the cleaning cycle. Unplug Jet

Clean System from the outlet, remove razor and

refill canister (see “Preparing Jet Clean System

for Use”).

8

When the entire cleaning cycle is complete

and the razor is hygienically clean, the

razor will be raised to the starting position

and the display on the razor will turn on

indicating that the razor is (re)charging.

30

ENGLISH

C

9

Pull the razor forward and lift razor from

Jet Clean System.

If the razor needs to be recharged, you can

simply leave it in the Jet Clean System after

cleaning and the razor will automatically

recharge. The display on the razor will indicate

the razor is recharging.

You may store your razor in the Jet Clean

System. Unplug from the outlet when

charging/cleaning is complete.

Extra-thorough cleaning method

Do not mix up the cutters and combs as the

shaving performance may be adversely affected

for several weeks before optimal shaving

performance is restored.

1

Turn razor OFF.

C

2

Pull the shaving head holder off the

bottom part of the shaving unit.

C

3

Slide the green retaining frame in the

direction of the arrows indicated on the

retaining frame.

31

Advertising
This manual is related to the following products: