Rear jack panel connections – Philips 27" real flat commercial TV User Manual
Page 7
7
REAR JACK PANEL CONNECTIONS
* WARNING :
-
Risk of electric shock. Rear jack panel must be removed by qualified personnel only.
-
Do not connect telephone cable or equipment to SmartPlug (RJ-12) connector.
Plug (R
Plug (R
Pb
Y
Pr
L
Audio
Video In
S-VIDEO
Component
Video Input
R
L
R
Monitor
Out
Smart Plug
Ext Spkr
SmartCard slot
& cover
RJ12
Note
:
1.
Do not connect Video In and S-Video simulta-
neously.
2.
When a Smart Card with Audio/Video and S-
Video inputs are installed into the Smart Card
slot, the inputs on the Smart Card cannot be
connected concurrently with the Video In or S-
Video and Audio L/R In of the TV set or vice
versa. In this case, you can only use either
the inputs on the Smart Card or TV set.
When connecting Y Pb Pr inputs to the
27HT4000D/27, please note that the correct Audio-
In connectors should be the Red & White jacks
under the label AV2 In, and not under AV1 In.
Pb
Y
Pr
L
S-VIDEO
AV1 in
R
L
R
Monitor
Out
Applicable to 27HT7210D/27 only
Applicable to 27HT4000D/27 only
AV2 in
3.