Turn on the photoframe 1, Connect a storage device, Remove a storage device – Philips 10FF3CMI-37 User Manual

Page 11

Advertising
background image

12

For the

SD slot, insert a memory card

until the memory card locks in place.

After a few seconds, photos on
the memory card are displayed in
slideshow mode consecutively.

Tip

If the memory card is empty or damaged, “[Sorry,
Card/Device error!]” is displayed.

Remove a storage device

For the USB slot, the CF slot, or the
SD/MMC/xD/MS/MS Pro Duo slot, pull
the memory card or USB fl ash drive out.
For the

SD slot, push the memory card

again to unlock and then pull out the
memory card.

Tip

If a 2G xD card is used with a USB drive, the system
may be unstable. Remove the xD card or the USB fl ash
drive.

Turn on the PhotoFrame

1

Press and hold for more than 1 second.

Photos are displayed in Slideshow
mode in the following priority:

SD/MMC/xD/MS/MS Pro Duo slot

SD slot

CF slot

slot

PhotoFrame

To turn off the PhotoFrame, press and hold

for more than 2 seconds.

To access the main menu, press .

»

»

»
»
»
»
»

Connect a storage device

You can display photos in one of the following
storage device:

Compact Flash type I
Secure Digital (SD)
Secure Digital (SDHC)
Multimedia Card
xD card
Memory Stick
Memory Stick Pro
Memory Stick Duo
Memory Stick Pro Duo
USB fl ash drive

1

For the USB slot, the CF slot, or the

SD/MMC/xD/MS/MS Pro Duo slot, insert
a USB fl ash drive or a memory card fi rmly.










RESET

RESET

EN

Advertising
This manual is related to the following products: