Philips 10FF3CMI-37 - Manual (Page 27)

28
Set button sound
1
In the main menu, select
[Setup]>[Options]>[Set Beep], then press
OK to confi rm.
2
Select [On] to turn on the button sound.
To turn off the button sound, select
[Off].
3
Press OK to confi rm.
View status of the
PhotoFrame
You can fi nd the free space, connected media,
and the fi rmware version of the PhotoFrame.
1
In the main menu, select [Setup]>[Options
]>[Status], then press OK to confi rm.
The status of the PhotoFrame is
displayed on the right of the screen.
•
»
To have the PhotoFrame sleep at the set
brightness of ambient lighting condition,
select [Off - Set current].
Tip
If the [On - Set current] brightness level is too close
with the [Off - Set current] brightness level, the display
Auto on/off function may not work. •
Disable Smart Power
1
In the main menu, select
[Setup]>[Options]>[Smart power]>[Off].
2
Press OK to confi rm.
Set Demo
1
In the main menu, select [Setup]>
[Options]>[DEMO].
2
Press OK to confi rm.
Set Auto Orientation
You can display photos in the correct
orientation depending the horizontal/vertical
orientation of the PhotoFrame.
1
In the main menu, select
[Setup]>[Options]>[Auto Orientation],
then press OK to confi rm.
2
Select [Enable] to set on Auto Orientation
function.
To set off Auto Orientation function,
select [Disable].
3
Press OK to confi rm.
•
•
EN