Philips Fidelio SoundBar Home theater HTL7180 4.1 CH wireless surround sound Bluetooth® 2 HDMI In & HDMI out ARC Aluminium - Manual (Page 13)

12 EN
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
1
Press V.SURR to select a surround mode.
• Surround: Creates a surround listening
experience. The V.SURR indicator on
the main unit lights up.
• Stereo: Two-channel stereo sound.
Ideal for listening to music.
Note
• When the surround speakers are undocked from the
main unit, it is fixed to surround mode only.
Equalizer
Change the high frequency (treble) and low
frequency (bass) settings of the SoundBar.
1
Press TREBLE +/- or BASS +/- to change
the frequency.
Treble/bass indicator
• When you change frequency levels, one
or multiple indicator (up to 8 indicators)
on the main unit light up to indicate a
frequency level. The more indicators light
up, the more the treble or bass is.
Auto volume
Turn the auto volume on to keep the volume
constant when you switch to a different source.
It also compresses the sound dynamics,
increasing the volume for quiet scenes and
decreasing the volume for loud scenes.
1
Press AUTO VOLUME ON/OFF to turn
auto volume on or off.
» When auto volume is turned on, the
V.SURR indicator blinks once.
-4 4
» When auto volume is turned off, the
V.SURR indicator blinks twice.
Synchronize picture and sound
If the audio and video are not synchronized,
delay the audio to match the video.
1
Press AUDIO SYNC +/- to synchronize
the audio with the video.
• AUDIO SYNC + increases the sound
delay, and AUDIO SYNC - decreases
the sound delay.
» When you change the value of sound
delay, the more value/delay you set,
the more indicators on the main unit
light up.
Night mode
For quiet listening, decrease the volume of loud
sounds when audio is played. Night mode is
only available for Dolby Digital soundtracks.
1
Press NIGHT MODE ON/OFF to turn
night mode on or off.
» When night mode is turned on, the
V.SURR indicator blinks once.
» When night mode is turned off, the
V.SURR indicator blinks twice.
Note
• If auto volume is set to turned on, you cannot enable
the night mode.
MP3 player
Connect your MP3 player to play your audio
files or music.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
HTL7180_F7_UM_V2.0.indb 12 2013/10/22 10:49:23