Wireless – Billion Electric Company MYGUARD 7500GL User Manual

Page 37

Advertising

myGuard 7500GL 802.11g Security ADSL Router

Chapter 4: Configuration

Wireless

WLAN Service:

Default setting is set to Enable.

Mode:

802.11b + g (Mixed mode), 802.11b and 802.11g. The factory default is 802.11b +

ESSID:

Enter the unique ID given to the Access Point (AP), which is already built-in to the

router’s wireless interface. To connect to this device, your wireless clients must have the
same ESSID as the device.

ESSID Broadcast:

Disable:

Any client that using the “any” setting cannot discover the Access Point (AP)

in question.

Enable:

Any client that using the “any” setting can discover the Access Point (AP) in

question.

Regulation Domain:

There are five Regulation Domains for you to choose from, including

North America (N.America)

, Europe, France, etc. The Channel ID will be different based

on this setting.

Channel ID:

Select the ID channel that you would like to use.

Connected:

true or false. That it is the connection status between the system and the

build-in wireless card.

AP Firmware Version:

The Access Point firmware version.

Advertising