Billion Electric Company MYGUARD 7500GL - Manual (Page 67)

myGuard 7500GL 802.11g Security ADSL Router
Chapter 4:Configuration
2. Click Port Filters . You will then be presented with the pre-defined port filter rules screen (in
this case for the low security level), shown below:
Click Delete
3. Click Delete to delete the existing HTTP rule.
4. Click
Add TCP Filter
.
Click Add TCP Filter
5. Input the port number (80) and set both Inbound & Outbound to Allow.
Input HTTP port number
Select “Allow”
6. The new port filter rule for HTTP is shown below:
61