Philips HP6540-00 - Manual (Page 10)

Using the Smart Tweezers
Your epilator comes with Smart Tweezers with integrated light for the easy removal
of facial hair such as your eyebrows. The Smart Tweezers are protected by a case with
integrated mirror which allows you to depilate wherever and whenever you want. The
Smart Tweezers are supplied ready for use with 3 button batteries in the battery
compartment.
Using the Smart tweezers
1 Use an eye pencil to mark the desired shape of your eyebrows. Remove any
hairs outside the marked shape.
2 Switch on the light by moving the on/off slide upwards.
3 Always pull out the hair in the direction of hair growth.
Do not use the Smart Tweezers to remove hairs that grow out of moles.
Do not point the light of the Smart Tweezers directly at your or somebody else’s
eyes.
Replacing the batteries
1 Open the battery and light compartment by turning the bottom anticlockwise
with a coin (Fig. 13).
2 Remove the old button batteries (Fig. 14).
Keep the button batteries out of the reach of children and pets. Button batteries
present a potential choking hazard.
3 Insert the new button batteries with the negative side pointing forward into
the battery and light compartment (Fig. 15).
Note: The Smart Tweezers work on three alkaline button batteries type L736H or AG3
(dia. 7.8 x 3.4mm).
4 Screw the bottom back onto the battery and light compartment by turning it
clockwise with a coin (Fig. 16).
Cleaning and maintenance
Cleaning the epilator
Note: Clean the epilator after every use.
Note: Make sure the epilator is switched off and unplugged before you start to clean it.
ENGLISH 10