Troubleshooting – Philips AJ6111-37 User Manual

Page 17

Advertising
background image

17

English

WARNING
Under no circumstances should you try to repair the system yourself, as this will
invalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. If
you are unable to remedy a problem by following these hints, consult your dealer or
PHILIPS for help.

Problem

Solution

Troubleshooting

nocd

or

Errindication

No sound

The system does not react when buttons
are pressed.

Remote control does not work

No disc inser ted. Insert a suitable disc

Replace/clean CD

CD-R(W) is blank or the disc is not finalized.
Use a finalized CD-R(W)

Moisture has condensed in the player. Remove
the disc and leave the player power-on until the
moisture evaporates.

Check whether the set is connected securely.

Make sure the set is not in the MUTE mode. If it
is, press MUTE to turn on the speaker.

Check whether the volume on the set has been
set to the lowest level. If it has, turn up the
volume.

CD-ROM disc inserted/CD contains non-audio
files. Use CD Audio discs only.

Remove and reconnect the AC power plug and
switch on the system again.

Remove the protective plastic tab before using
the remote control.

Reduce the distance between the remote
control and the set.

Replace the battery.

Point the remote control directly towards the IR
sensor.

Radio reception is poor

To Improve radio reception: For FM, extend and
adjust the AC power cord, as the FM antenna is
integrated with the power cord.

Increase the distance between the set and a TV,
VCR or radiation source.

The Clock setting is erased

Power has been interrupted or the power cord
has been disconnected. Reset the clock.

p001-p018_AJ6110_37-Eng

2009.1.10, 14:22

17

Advertising
This manual is related to the following products: