Philips HTS5800H-37 - Manual (Page 15)

E
ng
li
sh
15
Main Unit
a STANDBY-ON 2
– Turns on the recorder or switch to
standby mode.
b Disc tray
c OPEN CLOSE ç
– Opens/closes the disc tray.
d Display panel
– Show information about the current
status of the recorder.
e iR
– Point the remote control towards this
sensor
f HDD Active indicator
– Blue ring lights up while temporary
recording to the time shift buffer is in
progress.
g
– Starts recording the current TV channel
or the current video input source.
– Red ring lights up while recording to the
HDD or DVD recordable disc is in
progress.
É
– Starts playback the select title/track.
/
– Skips to the previous or next chapter/
track, or hold down the button to make
a reverse/forward search.
– Stops playback/recording.
Jacks behind the fl ap
Flip down the door as indicated by the
OPEN
É label at the right hand corner.
h S-VIDEO
– S-video input for SVHS/Hi8 camcorders
or SVHS/Hi8 video recorders.
In tuner mode, press SOURCE on the
remote control repeatedly to select
‘CAM2’ when using this input source.
i VIDEO
– Video input for camcorders or video
recorders.
In tuner mode, press SOURCE on the
remote control repeatedly to select
‘CAM1’ when using this input source.
j L/R AUDIO
– Audio input for camcorder or the audio/
video device which is connected to the
S-VIDEO or VIDEO jack.
k DV IN
– Input for digital camcorders or other
suitable devices using this connector.
Press DV on the remote control when
using this input source.