Philips HTS5800H-37 - Manual (Page 17)

E
ng
li
sh
17
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
Step 1: Basic Recorder Connections
(continued)
ANTENNA
TV
EXT 1
VIDEO
(CVBS)
AUDIO
S-VIDEO
(Y/C)
AUDIO
AUDIO
R
L P B
OUT 2
VIDEO
(CVBS)
OUT 1
Y
P R
COAXIAL
DIGITAL AUDIO OUT
L
R
AU D IO O U T S-V ID E O IN
V ID E O IN
TV
OR
Option 2
Option 3
OR
Option 1
Connecting the video cable
This connection enables you to view the
disc playback from the recorder.
You only need to choose one of the
options below to make your video
connection.
Option 1: Using Video (CVBS) jack
(good picture quality)
Use the supplied audio/video cables
(yellow plug) to connect the VIDEO
(CVBS)-OUT2 jack on the recorder to
the video input jack (or labeled as A/V In,
Video In or Composite) on the TV.
Option 2: Using S-Video jack
(excellent picture quality)
Use an S-video cable (not supplied) to
connect the S-VIDEO (Y/C) - OUT2
jack on the recorder to the S-Video input
jack (or labeled as Y/C or S-VHS) on
the TV.
Option 3 : Using Component Video
jack (best picture quality)
A Use the component video cables (red/
blue/green - not supplied) to connect the
Y P
B
P
R
-OUT1 jacks on the recorder
to the corresponding component video
input jacks (or labeled as Y Pb/Cb Pr/Cr
or YUV) on the TV.
B If your TV accepts Progressive Scan signal,
see page 65 for detailed Progressive Scan
set up.
IMPORTANT!
The progressive scan video quality is
only available through a Y P
B
P
R
connection and a progressive TV is
required. It is strongly advised to
complete the recorder installation
fi rst, before enabling the progressive
scan feature.