Philips 55PFL5705DV-F7 - Manual (Page 15)

14
• If device lock is unlocked, [ Device lock] will be displayed.
If device lock is locked, [ Device unlock] will be displayed.
• When device lock is locked, will be displayed at the top right
of the device icons.
5
Enter your PIN. (See ‘Setting your PIN’ on page 26.)
• Once you have set PIN, PIN input menu does not appear after
the unit is turned on.
Enable or disable RC key forwarding from the home menu
This section describes how to enable or disable RC key forwarding for a
particular device.
1
Press MENU on the remote control.
2
Use О / п / Н / Ж to select a device to enable or disable
RC key forwarding.
3
Press OPTIONS on the remote control.
4
Use О / п to select [ Enable RC key forwarding] or [ Disable RC key
forwarding], then press OK.
•
If RC key forwarding is set to off, [ Enable RC key forwarding] will
be displayed. If RC key forwarding is set to on, [ Disable RC
key forwarding] will be displayed.
• When you set RC key forwarding on, will be displayed at the
top left of the device icons.
Note
• This function is available only when your devices are connected to this unit
through HDMI cables and assigned to an HDMI port (HDMI1 to HDMI4) with
[Add new devices] in the home menu.
Philips Wireless MediaConnect
You can enjoy your TV as a PC monitor wirelessly using your home
network. Make sure you download the Philips Wireless MediaConnect
software and install it on your PC before you perform the steps below.
1
Launch Philips Wireless MediaConnect on your PC fi rst.
2
Press MENU on the remote control.
3
Use О / п / Н / Ж to select [ Philips Wireless MediaConnect].
• The start up screen for Philips Wireless MediaConnect will be
displayed and the unit searches for available PC that is running Philips
Wireless MediaConnect software.
This TV is Wireless LAN Ready. With the USB wireless LAN adapter
(supplied accessory: PH2010A) you can connect the TV to your network
wirelessly. By starting Philips Wireless MediaConnect on your PC, you can
stream the screen of your PC along with audio to your TV.
To use Philips Wireless MediaConnect you need to connect the TV to
your home network.
Install Philips Wireless MediaConnect
1
Start your internet browser on your PC and open the Philips Wireless
MediaConnect download page at www.philips.com/wifi mediaconnect
On the website, you can check the necessary PC system requirements.
2
Enter the 12 digit code printed on the cover of the User Manual or
back of your TV.
3
Click the 'Download now' button to download the free Philips
Wireless MediaConnect software.
4
Once downloaded, start the fi le 'Philips Wireless MediaConnect_
setup.exe'. Follow the instructions on screen.
6 Use more of your TV
Access TV menus
Menus help you to install channels, change picture and sound settings
then access other features.
Access the home menu
The home menu gives you easy access to connected devices, picture
and sound settings as well as other useful features.
1
Press MENU on the remote control.
Watch TV Browse USB Philips Wireless Media...
Add new devices Setup
2
Use О / п / Н / Ж to select and navigate through one of the
following menus.
• [
Watch TV ] Switches back to the antenna source if another
source is selected.
• [Browse USB] Accesses USB menus.
• [Philips Wireless MediaConnect] Accesses Philips Wireless
MediaConnect.
• [Net TV] Access [NETFLIX], [vTuner], [vudu] or [ Twitter].
• [Add new devices] Adds new devices to the home menu.
• [ Setup] Accesses menus that allow you to change picture,
sound and other TV settings.
3
Press OK to confi rm your choice.
4
Press MENU to exit.
Tip
• After selecting [ Add new devices], follow the on-screen instructions to select the
correct device and connector.
Lock or unlock your device from the home menu
This section describes how to lock or unlock specifi ed device.
1
Press MENU on the remote control.
2
Use О / п / Н / Ж to select a device to lock or unlock.
3
Press OPTIONS on the remote control.
4
Use О / п to select [ Device lock] or [ Device unlock], then press OK.
EN