Philips 55PFL5705DV-F7 - Manual (Page 32)

31
English
Note
• The range of input numbers is between 0 and 255.
• If you enter a number larger than 255, the number will automatically be 255.
• The manually entered number will be saved even if you change the setting to [Auto].
• When you enter a wrong number, press Color buttons (red) to cancel. (the number will
be back to [0].)
• If you want to enter 1 or 2 digit number in one cell, press OK to move on to the next cell.
• If the entered IP address or the default gateway or primary DNS number is same
as the default setting, IP address setting will be set to [Auto]. (The manually entered
number will be saved).
• When IP address setting is set to [Manual], the setting of DNS setting will automatically
be [Manual] and when IP address setting is set to [Auto], you can set either [Auto] or
[Manual] for DNS setting.
Proxy confi guration
1
Press MENU on the remote control and then use О / п / Н / Ж to
select [Setup] > [Installation] > [Network] > [Proxy confi guration].
2
Use О / п to select a setting and then press OK.
• For default settings, select [Do Not Use].
• If you need to change the proxy setting as instructed by your
internet service provider to set the designated proxy address
and port, select [Use].
Setting items Description
Proxy setting
Do not Use Not use the proxy server.
Use Uses the proxy server.
Proxy address *
Selects the number or word by using
О / п / Н / Ж, then press OK.
[Clear]: Clear the entered number or word.
[All clear]: Clear all the entered numbers or
words.
[a/A/@]: Switch between abc, ABC and @ ! ?
[Cancel]: Shows the cancellation display.
[ OK]: Set the entered number or word.
Proxy port *
Use О / п or the Number buttons to input
numbers.
* Items can be selected only when [Proxy port] is set to [Use].
3
Press MENU to exit.
Note
• The range of input numbers for the port number is between 0 and 65535.
(If you enter a number larger than 65535, it will be regarded as 65535.)
• For proxy port, the selected ports may be blocked and not be able to use depending
on your network environment.
• If the proxy address is entered with blank only, proxy server setting will be set to
[Do Not Use].
Wireless network setting (Manually enter your SSID)
Set up the connection to the Wireless LAN Access Point (AP) (e.g. wireless
router) manually by entering the wireless network name (SSID).
1
Press MENU on the remote control and then use О / п / Н / Ж to
select [Setup] > [Installation] > [Network] > [Wireless network]
> [Wireless network setting] > [Manually enter your SSID].
• Wireless LAN Access Point (AP) (e.g. wireless router) Name
(SSID) entry screen will appear.
Enter the wireless network name (SSID) using
О / п / Н / Ж, then
press OK.
[Clear] : Clear the entered number or word.
[All clear] : Clear all the entered numbers or words.
[a/A/@] : Switch between abc, ABC and @ ! ?
[Cancel] : Shows the cancellation display.
[OK] : Set the entered number or word.
2
Follow steps 3 to 4 in ‘Wireless network setting(Auto)’ on page 30.
Wireless network status
This menu displays only when you set [Wireless] in [Network selection].
You can check the status of Wireless network status.
1
Press MENU on the remote control and then use О / п / Н / Ж to
select [Setup] > [Installation] > [Network] > [Wireless network]
> [Wireless network status].
• Wireless network status list will be displayed.
2
Press MENU to exit.
IP confi guration
In following cases, select [IP confi guration] to set each setting as necessary.
- When connection test failed with the setting of [Connection test].
- When instructed by your internet service provider to make specifi c
settings in accordance with your network environment.
1
Press MENU on the remote control and then use О / п / Н / Ж to
select [Setup] > [Installation] > [Network] > [IP confi guration].
2
Use О / п to select a setting and then press OK.
Setting items Description
IP setting mode
Auto Sets the IP setting automatically.
Manual Sets the IP setting manually.
IP address * 1, 3
A set of numbers which are assigned to
devices participating in a computer network.
Subnet mask * 1, 3
A mask which is used to determine what
subnet an IP address belongs to.
Default gateway * 1, 3
IP address of the network device (such as
router) which provides internet access.
DNS setting
mode
Auto Sets the DNS setting automatically.
Manual Sets the DNS setting manually.
Primary DNS * 2, 3
A server which handles the name and IP
address over the internet.
Secondary DNS * 2, 3
A server which handles the name and IP
address over the internet.
MAC address
An address which recognizes the devices
connecting to the network. It is also called
Hardware Address.
* 1 Items can be selected only when [IP setting mode] is set to [Manual].
* 2 Items can be selected only when [DNS setting mode] is set to [Manual].
* 3 Use О / п or the Number buttons to input numbers. When you press
О / п to input numbers then press OK or input the triple digits by using
the Number buttons, the cursor moves to the next entry field. When you
press О / п to input numbers then press OK or input the triple digits by using
the Number buttons at the rightmost entry field, numbers will be stored and
go back to the previous menu.
3
Press MENU to exit.
EN