Philips 55PFL5705DV-F7 - Manual (Page 23)

22
Setting items Description
Active control
Off Sets Active control to off.
On with
Light
Sensor
Adjusts backlight for the best picture quality by
dynamically adjusting the backlight intensity in
accordance with lighting condition in the room.
On without
Light
Sensor
Adjusts backlight for best picture quality based
on the incoming video signal.
Picture format
Automatic
Refer to ‘Summary of picture formats’ on
page 23.
Super zoom
4:3
Movie
expand 14:9
Movie
expand 16:9
Wide
screen
Unscaled
Mode selection
PC
Turns off image enhancement features which
makes the TV to act purely as a monitor.
HDTV
Enables image enhancement features to
improve picture quality.
Auto adjustment
The horizontal / vertical position, clock and
phase of the PC screen are automatically
adjusted.
Clock Setting to stabilize the PC screen.
Phase Setting to improve the clarity of the PC screen.
Horizontal shift
Adjusts the horizontal position of the picture
for PC screen.
Vertical shift
Adjusts the vertical position of the picture for
PC screen.
5
Press MENU to exit.
Note
• [ Mode selection] will not be displayed when incoming signals are other than
720 x 480p 60Hz, 1280 x 720p 60Hz and 1920 x 1080p 24 / 30 / 60Hz.
Changing picture and sound settings
You must set [Home] in [ Location]. (Refer to page 30.)
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes to standby mode.
Changing picture settings
1
Press MENU on the remote control.
2
Use О / п / Н / Ж to select [ Setup] > [ Picture].
Picture
Sound
Features
Installation
Software update
Settings assistant Start now
Contrast
Brightness
Color
Tint
Sharpness
Color temperature Cool
Dynamic contrast Off
3
Use О / п / Н / Ж to select one of the picture settings, and press OK
to enter the setting.
4
Adjust the picture quality.
The following picture settings can be confi gured. Depending on
the format of the picture source, some picture settings are not
available.
Setting items Description
Settings assistant
Use [ Settings assistant] to guide you through
the best picture and sound settings.
Contrast
Adjusts the intensity of bright areas, keeping
dark areas unchanged.
Brightness Adjusts the intensity and details of dark areas.
Color Adjusts color intensity.
Tint Adjusts the color balance in an image.
Sharpness Adjusts the level of sharpness in image details.
Color
temperature
Cool More blue tones.
Normal Standard tones.
Warm More orange tones.
Dynamic
contrast
Off Sets Dynamic contrast to off.
On Automatically enhances contrast in an image.
Digital Natural
Motion
Off Sets Digital Natural Motion to off.
Minimum Makes an image smoother.
Maximum Makes an image smoothest.
Noise
reduction
Off Sets Noise reduction to off.
On Reduces noise in an image.
MPEG artifact
reduction
Off Sets MPEG artifact reduction to off.
On
Reduces a blockiness and a blurriness and
judder by digital filter.
Color
enhancement
Off Sets Color enhancement to off.
On Makes colors more vivid bright colors.
EN