Philips 27RF50S99 - Manual (Page 24)

24
VOL
75 ⍀ VIDEO L/ Mono AUDIO R
Monitor out COMPONENT VIDEO INPUT AV1 in
S-VIDEO Y
Pb
Pr
75 ⍀
VIDEO
L/
Mono
AUDIO
R
Monitor out
COMPONENT VIDEO INPUT
AV1 in
S-VIDEO
Y
Pb
Pr
ANTENNA
OUT
ANTENNA
IN VIDEO AUDIO
IN IN
OUT OUT
L R
3
1
2
4
5
6
S-VIDEO OUT
U
SING THE
S-V
IDEO
I
NPUT
J
ACKS
T he S(uper)-Video connection on the
rear of the TV can provide you with
better picture detail and clarity for the
playback of accessory sources such as
DBS (digital broadcast satellite), DVD
(digital video discs), video games, and
S-VHS VCR (video cassette recorder)
tapes than the normal antenna picture
connections.
NOTE: The accessory device must
have an S-VIDEO OUT(put) jack in
order for you to complete the connec-
tion on this page.
Connect one end of the S-VIDEO
CABLE to the S-VIDEO jack on the
back of the TV. Then connect one end
the AUDIO (red and white) CABLES
to the AV1 in AUDIO L and R(left and
right) jacks on the rear of the TV.
Connect other end of the S-
VIDEO CABLE to the S-VIDEO
OUT jack on the back of the VCR.
Then connect the other ends of the
AUDIO (red and white) CABLES to
the AUDIO (left and right) OUT jacks
on the rear of the VCR.
Turn the VCR and the TV ON.
Press the CH + or – buttons on the
remote to scroll the channels until AV1
appears in the upper left corner of the
TV screen.
Slide the TV/VCR/ACC switch to
the VCR position.
Now your ready to place a prere-
corded video tape in the VCR and
press the PLAY ᮣ button.
Let's
Look
Inside!
AUDIO IN
(RED/WHITE)
VCR
(EQUIPPED WITH
S-VIDEO JACKS)
S-VIDEO
CABLE
BACK OF VCR
BACK OF TV
IF YOU ARE USING A MONO DEVICE, USE
ONLY THE AUDIO L/MONO JACK. IF A
DUMMY JACK IS PLUGGED INTO THE
AUDIO R, NO SOUND WILL BE HEARD.
The S-VIDEO and VIDEO
AV1 in(puts) are in parallel. The
S-VIDEO input is dominant when in
use. If separate video signals are con-
nected to the S-VIDEO and VIDEO
AV1 in(puts), the signal from the
VIDEO AV1 in(put) will not be usable.
S MART H ELP