Philips 32RF50S - Manual (Page 37)

37
SLEEP
TV/VCR
SOUND PICTURE
MENU
CH
MUTE
MULTIMEDIA CC CLOCK
POWER
VOL
STATUS/EXIT
SURF
PROGRAM
LIST
INCR.
SURR.
VCR
RECORD
VCR
TV
ACC
24
AV3
AV2
ANT 75‰
L
Monitor out
VIDEO
S-VIDEO
SURROUND SOUND
8 8
+ R – – L +
AV1 in
Y
Pb
Pr
AV2 in
AUDIO
R
4
AV1
1
3
2
AUDIO OUT
L R S-VIDEO
OUT
ANT/CABLE
OUT
VIDEO
OUT
A/CH
T
he S(uper)-Video connection
on the rear of the TV can pro-
vide you with better picture detail
and clarity for the playback of
accessory sources such as DBS
(digital broadcast satellite), DVD
(digital video discs), video games,
and S-VHS VCR (video cassette
recorder) tapes than the normal
antenna picture connections.
NOTE: The accessory device
must have an S-VIDEO OUT(put)
jack in order for you to complete
the connection on this page.
Connect the S-VIDEO
CABLE to the S-VIDEO input
jack on the rear of the television.
Then connect the AUDIO (red
and white) cables to the AUDIO
AV2 jacks on the rear of the TV.
Connect the S-VIDEO
CABLE to the S-VIDEO output
jack on the accessory device.
Then connect the red and white
AUDIO cables to the AUDIO
(left and right) output jacks on the
rear of the accessory device.
Turn the accessory device
ON.
Press the MULTIMEDIA
button on the remote control to
tune the AV2 channel. You are
now ready to view the tape or
disc on the TV.
AUDIO IN
(RED/WHITE)
S MART H ELP
The S-VIDEO and
VIDEO AV2 in(puts) are in
parallel. The S-VIDEO input is
dominant when in use. If separate
video signals are connected to the
S-VIDEO and VIDEO AV2
in(puts), the signal from the
VIDEO AV2 in(put) will not be
usable.
If you have added AV2 in(puts) to
the TV’s channel memory, just
press the CHANNEL (+) or (–)
button until the AV2 in(puts)
(channel) mode is selected.
S
OUND
– U
SING THE
A
UDIO
/V
IDEO
I
NPUT
J
ACKS
(
CONT
’
D
)
BEGIN
S-VIDEO CABLE
(NOT SUPPLIED)
DBS, DVD, Video Game, etc.
(EQUIPPED WITH S-VIDEO AND
AUDIO OUTPUT JACKS)
BACK OF ACCESSORY
NOTE: Repeatedly pressing the
MULTIMEDIA button on the remote
will toggle the picture source from
the current channel, the last viewed
channel, then the AV1 (or CVI) con-
nection, the AV2 connection, and the
AV3 connection.
S-V
IDEO
I
NPUT
BACK OF TV
NOTE: If you are using a
nonstereo device, use only
the Audio R jack.