Philips DV910VHS98 - Manual (Page 30)

POWER
MARKER
TIMER SET VCR/TV MEMORY SPEED
REC
/OTR
OUTPUT SELECT
3
4 5 6
7 8 9
ZOOM
TIME SEARCH
SLOW
STATUS/EXIT
SEARCH MODE
DISPLAY
0 +10
2 1
VCR DVD
E
B
OK
D
H / L K / G
C
CLEAR
REPEAT
SETUP
MENU TITLE
RETURN MODE
SKIP/CHANNEL CHANNEL/SKIP
A-B
AUDIO ANGLE SUBTITLE
F
30 Remote Control Buttons (cont’d)
Number Buttons
DVD mode ●
Press to directly select a Track (Audio CD) for playback.
Details are on page 57.
Press to program Tracks (Audio CD) for playback.
Details are on page 62.
VCR mode ●
Use to set up VCR features (such as the clock).
Press to select TV channels at the DVD/VCR.
Cable Users: Enter channel numbers as a two-digit number for
the quickest results. For example, to select channel 6, press 0,6. If
you only press the Number 6 button, channel 6 will be selected
after a brief delay. (There also may be a brief delay when you
select channels 10, 11, and 12.) If you want to select channels 100
and above, enter channel numbers as a three-digit number. For
example, to select channel 117, press number buttons 1, 1, 7.
Antenna Users: Enter channel numbers as a two-digit number
for the quickest results. For example, to select channel 5, press
0,5. If you only press the Number 5 button, channel 5 will be
selected after a brief delay.You may only select channels 2-69.
SKIP/CHANNEL Buttons
DVD mode ●
Press to skip Chapters or Tracks. Details are on pages 57-58.
VCR mode ●
Press to change TV channels at the DVD/VCR.
• To use the remote control to operate the DVD player and its features, press the DVD button on the remote control
before pressing other DVD buttons. Make sure the DVD/VCR is in DVD mode by pressing the OUTPUT SELECT but-
ton so that the red DVD OUTPUT light appears on the front of the DVD/VCR.
• To use the remote control to operate the VCR and its features, press the VCR button on the remote control before
pressing other VCR buttons. Make sure the DVD/VCR is in VCR mode by pressing the OUTPUT SELECT button so
that the green VCR OUTPUT light appears on the front of the DVD/VCR.
OUTPUT SELECT Button
Press to select DVD mode or VCR mode.The red DVD OUT-
PUT light will appear on the front of the DVD/VCR when it is
in DVD mode.The green VCR OUTPUT light will appear on
the front of the DVD/VCR when it is in VCR mode.
MODE Button
Press to set up programmed or random playback
for an Audio CD. Details are on pages 62-63.
MARKER Button
Press during disc playback to set a Marker, which will give you quick
access to points that you select on a Disc. Details are on page 71.
REC(ord)/OTR Button
Press once to start a recording. Details are on page 33. Or, press
repeatedly to start a One-Touch Recording. Details are on page 35.
MEMORY Button
Press to memorize a tape position at which the real-time counter
was set to 0:00:00. Details are on page 42.
Helpful Hints
DV910(H9100).QX33 01.8.9 10:26 AM Page 30