40 rerecording (tape duplication) – Philips DV910VHS98 User Manual

Page 40

Advertising
background image

1

Make the connections shown above.

40 Rerecording (Tape Duplication)

3

DVD/VCR 2 will record your tape. Insert a blank tape in the cas-
sette compartment of DVD/VCR 2.
The DVD/VCR must be in
VCR mode and VCR position. (The green VCR OUTPUT light and
the VCR/TV light will appear on the front of the DVD/VCR.)

4

Turn on the TV and set it to channel 03 or 04, whichever
channel the CH3/CH4 switch on DVD/VCR 2 is set to.

5

Point the remote control at DVD/VCR 2. Press the VCR but-
ton, then press the Number buttons 0, 0, 1 or 0, 0, 2.
(See
Helpful Hints at right.)

6

Press the SPEED button to select SP or SLP at DVD/VCR 2.

7

Press the VCR PLAY button on DVD/VCR 1 and the VCR
REC(ord)/OTR button on DVD/VCR 2 at the same time.
To stop recording, press the STOP/EJECT button on DVD/VCR 1,
then press the STOP/EJECT button on DVD/VCR 2.

DVD/VCR 1

Playing unit

DVD/VCR 2

Recording unit

2

DVD/VCR 1 will play your tape. Put a prerecorded tape into the
cassette compartment of DVD/VCR 1.
The DVD/VCR must be
in VCR mode and VCR position. (The green VCR OUTPUT light and
the VCR/TV light will appear on the front of the DVD/VCR.)

1.Audio cables from DVD/VCR AUDIO OUT Jacks of

DVD/VCR 1 to AUDIO IN Jacks of DVD/ VCR 2

2.Video cable from DVD/VCR

VIDEO OUT Jack of DVD/VCR 1

to VIDEO IN Jack of DVD/VCR 2

3. RF coaxial cable from the ANT-OUT

(Antenna Out) jack of DVD/VCR 2

to the TV’s ANTENNA IN Jack

• If you use the AUDIO and VIDEO IN

Jacks on the back of DVD/VCR 2,
press Number buttons 0, 0, 1 at
step 5. AV REAR will appear on the
TV screen.

• If you use the AUDIO and VIDEO In

Jacks on the front of DVD/VCR 2,
press Number buttons 0, 0, 2 at
step 5. AV FRONT will appear on
the TV screen.

• Unauthorized recording of copyright-

ed television programs, video tapes,
or other materials may infringe on
the rights of copyright owners and
violate copyright laws.

• If a program has copyright protec-

tion, it may not record clearly.

• These instructions show you how to

copy tapes using two DVD/VCRs like
yours. Different VCRs may operate
differently.

• You cannot record DVD material

onto a video cassette tape using a
single unit.

Helpful Hints

The instructions on this page show you how to copy tapes.The illustration uses two DVD/VCRs. Different
VCRs may operate differently.To duplicate a tape, make the connections shown, then follow steps 1-7.

VCR

DV910(H9100).QX33 01.8.9 10:26 AM Page 40

Advertising
This manual is related to the following products: